ENGLISHSpotlightScan™Installation Manuallowrance.com
8 | SpotlightScan | Installation Manual10. Make sure the mounting plate is clean and dry. Clean the plate with rubbing alcohol, if necessary.11. Pull
| 9SpotlightScan | Installation ManualMotorGuide plastic foot pedalThere is not a solid contact point for the position sensor lever arm roller on the
10 | SpotlightScan | Installation Manual5. Make sure the mounting surface is clean and dry. Clean the surface with rubbing alcohol, if necessary.6.
| 11SpotlightScan | Installation ManualMinn Kota foot pedal1. Remove power from the trolling motor and deploy the motor so it can turn freely. 2. Ma
12 | SpotlightScan | Installation ManualWiring diagramsTTHDS Gen2 TouchPosition sensorSpotlightScan transducerNMEA 2000 networkTRANSDUCER1 TRANSDUCER2
*988-10623-001*
| 1SpotlightScan | Installation ManualPrefaceAs Navico is continuously improving this product, we retain the right to make changes to the product at a
2 | SpotlightScan | Installation ManualAbout this manualThe manual does not cover basic background information about how the heading sensor works. Suc
| 3SpotlightScan | Installation ManualContentsSpotlightScan transducer Position sensorRoller plate Adhesive Foam pads (x4)Mounting plate No. 6 (6/32)
4 | SpotlightScan | Installation ManualInstallationThis document covers installation of the SpotlightScan system on all MotorGuide and Minn Kota cable
| 5SpotlightScan | Installation ManualInstalling the position sensorThe position sensor will be installed on the foot pedal base. It must be installed
6 | SpotlightScan | Installation ManualFoot pedal adjustmentMake sure your foot pedal steering cable does not have any slack; otherwise, the quality o
| 7SpotlightScan | Installation ManualMotorGuide Tour series foot pedal1. Remove power from the trolling motor and deploy the motor so it can turn fr
Kommentare zu diesen Handbüchern